.jpg)
DR-44WL
Portable Handheld Recorder with Wi-Fi
TASCAM's DR-44WL is the latest recording innovation from TASCAM. It starts with high-quality stereo condenser microphones, updated with a new XY pattern and high-performance mic components. Two locking XLR inputs feed TASCAM's latest microphone preamp design, with the lowest noise level and richest sound available in a portable recorder.
- DR-44WL × 1
- AC adapter (GPE053B) × 1
- microSD card with adapter (in the unit) × 1
- USB cable (80 cm) × 1
- AA alkaline batteries × 4
- Fur windscreen × 1
- Grip × 1
- Shoe mount adapter × 1
- Soft case × 1
- Owner's Manual (including warranty) × 1
This model has been discontinued in North, Central and South America.
Please check the availability with your local distributors in other areas.
Features at a Glance
Recorder Section
- Supported WAV recording formats: 44.1k/48k/96kHz, 16/24bit, WAV/BWF format
- Supported MP3 recording format: 44.1k/48kHz, 32k to 320kbps MP3
- Recording media: SD/SDHC/SDXC card (up to 128GB SDXC card)
Recording Hardware
- Cardioid stereo condenser microphones fixed in X-Y position
- High sound pressure design captures levels up to 132dB SPL
- Innovative shock mount structure reduces physical noise
- XLR/TRS inputs compatible with mic or line level (-10 or +4dBu)
- +48V phantom power supply for condenser microphones
- PGA (programmable gain amplifier) and Cirrus Logic CS42L52 audio codec for low-noise, high-performance audio recording
Key Features
- MTR mode enables multitrack music production
- Four-track mode supports advanced recording
- Remote control, file transfer and streaming playback using 2.4GHz Wi-Fi
- Wi-Fi connects directly to smartphone without a router
- Full remote control using the free TASCAM app for iOS and Android
- Recorded audio can be posted directly to SoundCloud using the TASCAM DR Control app
Recording Functions
- Dual level recording function allows simultaneous recording of a second file at a lower level
- Dual-format recording function allows simultaneous recording of both WAV and MP3 files
- Automatic level optimization functions (Peak Reduction & Limiter)
- Low-cut filter with four selectable frequencies (40/80/120/220Hz)
- Pre-recording buffer records up to 2 seconds prior to starting recording
- Automatic track increment function that can be set according to the application (level, elapsed time or manual)
- Auto recording function that can detect the signal input signal level and automatically start recording
- Automatic mark function that adds marks according to preset conditions (peak detection or manual)
Playback Functions
- Speed change (VSA) function for adjusting the speed from 0.5 to 2.0 times (in 0.1 increments)
- A-B Loop playback function that is convention for music rehearsal
Editing Function
- Automatic division function that divides files at marks (manual division also possible)
- M-S decoding function for utilizing M-S microphones
Other Functions
- Reverb effect for vocal and instrument resonance
- Automatic power-saving function that prevents unnecessary use of battery power
- Resume function that retains the last stop position when power is turned back ON
- Chromatic tuner and a metronome are available in 4-track mode (V1.10)
- File name format can be set to use a user-defined word or the date
- Audio files created on computers can be played (only in formats compatible with this product)
Other Hardware
- Built-in monaural speaker with 0.3W output
- 128×128 pixel oversized graphic LCD with backlight
- USB 2.0 high-speed file transfer to a computer
- Stereo mini headphone line output / headphone output connector
- Powered by four AA batteries, USB bus power, or AC adapter
- Long-time operation of over 16 hours using the internal batteries (Alkaline battery, 16/44.1, 2ch, Wi-Fi OFF)
- Quality construction with aluminum side panels and genuine brass mic guards for durability
- Carrying strap connection
- Tripod attachment screw-hole
- 4GB microSD card and SD card adapter are included
- Standard accessories: AC adapter, windscreen, grip that is compatible with mic stands, shoe mount adapter, case
- RoHS certified
Spec Description
| DR-22WL | DR-44WL | |
| Recording media | microSD card (64MB to 2GB), microSDHC card (4GB to 32GB), microSDXC card (48GB to 128GB) |
SD card (64MB to 2GB), SDHC card (4GB to 32GB), SDXC card (48GB to 128GB) |
| Recording format | ||
| WAV/BWF | ||
| Sampling frequency | 44.1k/48k/96k Hz | |
| Quantization bit rate | 16/24-bit | |
| MP3 | ||
| Sampling frequency | 44.1k/48k Hz | |
| Recording bit rate | 32k/64k/96k/128k/192k/256k/320k bps | |
| Playback bit rate | 32kbps to 320kbps | |
| Number of channels | 2-channels (Stereo) | 4-channels |
| 4CH mode | - | Mono (Up to 4 files) Stereo (Up to 2 files) Stereo (1 file) + Mono (Up to 2 files) |
| MTR mode | - | Mono (Up to 4 files) |
| Analog Inputs | ||
| EXT MIC/LINE IN | ||
| Connector | 1/8" (3.5mm) stereo mini jack, Plug-in power Compatible |
XLR-3-31, 1/4" (6.3mm) TRS standard jack, Phantom Power Compatible |
| Input Impendance | 10kΩ or more | 2.2kΩ or more |
| Nominal Input Level | –20dBV | - |
| Maximum Input Level | –4dBV | - |
| EXT IN [MIC] | ||
| Nominal Input Level | - | –17.3dBu ±2dB |
| Maximum Input Level | - | –1.3dBu ±2dB |
| EXT IN [LINE] | ||
| Nominal Input Level | - | +4dBu |
| Maximum Input Level | - | +20dBu |
| Analog Outputs | ||
| PHONES/LINE OUT | ||
| Connector | 1/8" (3.5mm) stereo mini jack | |
| LINE OUT | ||
| Nominal Output Level | –14dBV(10kΩ load) | |
| Maximum Output Level | +2dBV(10kΩ load) | |
| PHONES | ||
| Maximum Output | 20mW + 20mW (32Ω load) | |
| USB | ||
| Connector | Micro-B type | |
| Format | USB2.0 HIGH SPEED mass storage class | |
| Wi-Fi | ||
| Compliant | IEEE 802.11b/g/n (2.4GHz only)) | |
| Communication mode | Simple access point (Limited AP) | |
| Security | WPA2-PSK (WPS2.0-supported) | |
| Tripod attachment screw-hole | 1/4" Tripod attachment screw-hole | |
| Power Supply | 2 AA batteries (alkaline or NiMH), USB bus power from a computer, AC adapter (TASCAM PS-P515U, sold separately) |
4 AA batteries (alkaline or NiMH), USB bus power from a computer, Dedicated AC adapter (GPE053B supplied with the unit) |
| Power consumption | 1.7W (maximum) | 2.5W (maximum) |
| Battery operation time | *All times are approximate. | |
| Format | WAV, 44.1kHz, 16-bit | |
| Alkaline batteries (EVOLTA) | ||
| Recording | 17.5 hours (With built-in mic) | 16 hours (When MIC input is selected, phantom is not used) |
| Playback | 19 hours (With built-in speaker) | – |
| Ni-MH batteries (eneloop) | ||
| Recording | 13.5 hours (With built-in mic) | 12 hours (When MIC input is selected, phantom is not used) |
| Playback | 14.5 hours (With built-in speaker) | – |
| Dimensions (W×H×D) | 2.1" × 6.1" × 1.4" / 52.5 x 155 x 36.6 mm |
3.1" × 6.3" × 1.7" / 79 x 162.2 x 42.5 mm |
| Weight | 6.0 oz. / 170 g (including batteries) 4.3 oz. / 123 g (excluding batteries) |
12.2 oz. / 346 g (including batteries) 8.8 oz. / 251 g (excluding batteries ) |
| Accessories | 4GB microSD card (in the unit), USB cable, 2 AA batteries for confirming operation, Owner's Manual (including warranty) | AC adapter (GPE053B), 4GB microSD card with adapter (in the unit), USB cable (80 cm), 4 AA batteries for confirming operation, Fur windscreen, Mic stand adapter, Shoe mount adapter, Soft case, Owner's Manual (including warranty) |
| Audio Performance | |
| Frequency response | 20Hz to 20kHz +1dB/–3dB (Fs 44.1kHz, EXT IN to LINE OUT, JEITA) 20Hz to 22kHz +1dB/–3dB (Fs 48kHz, EXT IN to LINE OUT, JEITA) 20Hz to 40kHz +1dB/–3dB (Fs 96kHz, EXT IN to LINE OUT, JEITA) |
| Distortion | 0.05% or less (Fs 44.1k/48k/96k Hz, EXT IN to LINE OUT, JEITA) |
| S/N ratio | 92dB or more (Fs 44.1k/48k/96k Hz, EXT IN to LINE OUT, JEITA) |
Information
| Latest version info | |
| System Firmware | V2.15 |
| Wi-Fi Firmware | V2.00 |
| TASCAM DR CONTROL for Android (Android 10 - 13) | V2.2.1 |
| TASCAM DR CONTROL for Android (Android 6 - 9) | V2.1.0 |
| TASCAM DR CONTROL for iOS | V2.1.1 |
| TASCAM DR FILE TRANSFER | V1.00 |
- When punching in and out in MTR mode, recording errors would occasionally happen. This has been fixed.
- Android 13 is now supported.
- When updating firmware to V2.00 or later:
- Firmware V2.00 or later cannot be updated via the TASCAM DR CONTROL app.
Please proceed to update the firmware manually through the DR unit. - For users using V1.11 or earlier versions:
- When updating firmware V1.11 to V1.13 or later, an error will occur and the firmware will not be updated normally.
Please update it to V1.12 once before updating your unit to the latest firmware available.
Documents
Manuals
| DR-44WL : Reference Manual V2.10 | 04-12-2019 |
|
|
|---|---|---|---|
| DR-44WL : Owner's Manual V2.10 | 04-12-2019 |
|
|
| TASCAM DR FILE TRANSFER Owner's Manual | 05-11-2017 |
|
|
| TASCAM DR CONTROL Reference Manual V2.00 | 01-20-2017 |
|
|
| TASCAM DR CONTROL Owner's Manual | 10-16-2015 |
|
Spec
| XRI Specification Document | 12-21-2017 |
|
|---|
Firmware / Software
Instructions
| Release Notes | 08-31-2021 |
|
|
|---|---|---|---|
| Firmware update procedures | 01-20-2017 |
|
Firmware
| System Firmware V2.15 | 08-31-2021 |
|
|
|---|---|---|---|
| System Firmware V2.14 | 02-18-2020 |
|
|
| System Firmware V1.21 | 10-09-2015 |
|
|
| Firmware V1.12 | 12-18-2014 |
|
Software
| TASCAM DR CONTROL for Android | 05-07-2020 |
-
|
|
|---|---|---|---|
| TASCAM DR FILE TRANSFER V1.00 for Mac | 05-11-2017 |
|
|
| TASCAM DR FILE TRANSFER V1.00 for Windows | 05-11-2017 |
|
|
| TASCAM DR CONTROL for iOS | 03-17-2017 |
-
|
Compatibility
| SD Supported Media | 05-16-2025 |
|
|---|
Compatible OS
Windows
Windows 10 (May 2020 Update),Windows 8.1,Windows 7,
Mac
macOS Catalina (10.15),macOS Mojave (10.14),macOS High Sierra (10.13),
FAQs
The DR-44WL has a blue LED that shows the Wi-Fi status. Here are the possible mesages from the LED:
- OFF -> No WiFi active.
- Blinking continuously -> WiFi active, but no control app connected.
- Solid ON -> WiFi active and connected to a control app.
- Brief blink -> connected, command received.
Note that the DR-44WL will shut down its WiFi when the battery level gets low, to maximize the remaining record time.
You need to "unzip" the files that you download, ending in ".zip" These files are compressed by the server to make your download times as quick as possible.
On Mac OSX, double-click the file to expand it.
On Windows OS, right-click the file and "Extract All."
There are 2 update files used for the DR-44WL (and DR-22WL), system and Wi-Fi.
To update the System, press MENU and >> while powering on to go into PROGRAM UPDATE mode.
To update the Wi-Fi, press 4 and >> while powering on to go into Wi-Fi F/W UPDATE mode.
The list of available files will show both system and WiFi files, so choosing the wrong one for the current update mode results in the "ERROR Product" message.
Some (not all) Android devices have a setting called "Avoid No Internet Connections." This is found in the Wi-Fi settings under Advanced. It tells the device not to "use a Wi-Fi network unless it has an Internet connection." Uncheck this box.
Press record once so that the REC light is flashing. Then press 3 and 4 at the same time. In the display they will be joined together. Instead of [3] [4] it will look like [3 4]. Then you arm them together like you do with 1 & 2 (press one and the other is also armed.)
To change the input gain of two channels at once, first press the Input Level button on the side. Next, select the first channel you want to change (e.g. track 1.) Then press the second channel you want to change (e.g. track 2.) Now you can move the input gain knob to change both at once.
Make sure there is a formatted SD/microSD card in the unit and that you have a Standard USB 2.0 Type-A to micro-B DATA cable (not simply a charging cable) connected between the TASCAM unit and your computer. Occasionally a user will forget that a formatted microSD card must be in the unit. However, 1 times out of 10 when the card is not the issue, having the wrong cable type ends up being the culprit. This is because there is no easy way to differentiate between the two types. You must specify this to the vendor you are purchasing the cable from.