Products :: Peripheral :: ML-32D

ML-32D - Bidirectional 32 Channel Dante to Analog Convertor

ML-32D SPECIFICATIONS

Formats

44.1/48 kHz, 16/24 bit

88.2/96 kHz, 16/24 bit

Input/output ratings

PRIMARY/SECONDARY connectors

Connector: RJ-45

Transmission protocol: Dante

Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)

Cables: category 5e or faster STP cables

ANALOG OUTPUT connectors

Connector: D-sub 25-pin

Locking screws: No. 4-40 UNC (inch type)

Nominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)

Maximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)

Output impedance: 200 Ω or lower

Applicable load impedance: 2 kΩ or higher

ANALOG INPUT connectors

Connector: D-sub 25-pin

Locking screws: No. 4-40 UNC (inch type)

Nominal input levels: +4 dBu, +6 dBu (only when maximum input level is +15 dBu)

Maximum input levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)

Input impedance: 10 kΩ or higher

 * 0 dBu=0.775 Vrms   

Audio performance

ANALOG IN to DANTE OUT

Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-0.5 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)

Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)

S/N ratio: 113 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)

Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)

DANTE IN to ANALOG OUT

Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-1.0 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)

Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)

S/N ratio: 110 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)

Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)

Other

Power: AC100-240 V, 50/60 Hz

Power consumption: 22W

Dimensions: 483 × 45 × 303.8 mm (width x height x depth)

Weight: 3.5 kg

Operating temperature range: 0–40º

Included items: Main unit x1, Power cord x1, Rackmount screw kit x1, Owner’s Manual (this document) including warranty x1